Pearl Clean Wheels is a first class commercial acidic Alloy Wheel cleaning formula which rapidly removes ingrained oxidisation, brake dust, corrosion and traffic film from the most intricate and elaborate wheel designs leaving them brilliantly clean and shiny. More powerful than all its competitors but gentle enough for use on damage prone designs, removing the most stubborn brake dust and grime with ease.
Directions for use: Remove any loose or excessive dirt. Apply onto wheel using brush, sponge or low pressure spray and agitate if necessary to assist penetration, leave cleaner in contact for up to 10 minutes to penetrate and wash off thoroughly with clean water. Take care to prevent contact with surrounding paintwork or plastics as contact could cause staining. Any splashes must be washed off immediately with water. Use as often as is necessary, but for frequent to increase product economy can be diluted with equal amount of clean water. (Chrome cleaning care must be taken when using this powerful product for cleaning and removing rust with contact time 2-3 minutes. For poor condition chrome test a small inconspicuous area first to ensure plating is not adversely affected).
Do not use on: Warm or hot surfaces or in direct sunlight. Do not allow product to dry onto surface. Do not use on unlacquered, magnesium alloys, anodised, cadmium plating, stainless steel finishes or any aircraft components. Note Clean Wheels will not remove corrosion which has attacked an alloy surface beneath a clear lacquer. This type of treatment requires specialist attention.
For a gentle approach to alloy wheel care and cleaning where an acidic based formula is not an option, Pearl Alloy Wheel Cleaner Non-Acidic provides an unrivalled solution which is extensively used by a leading global vehicle brand manufacturers.
